Skip to content
M2TOOLKIT

Education · free tool

Strain Calculator

Find strain from a length change, or from stress and stiffness.

Use it as often as you like — it's free, with no sign-up and no limits.

  • Education
  • Free
  • No sign-up
  • Nothing is sent or stored
  • Updated
Formula
mm
mm

Result

Strain
0.001
Change in length (ΔL)
0.5 mm
Original length (L₀)
500 mm
As a percentage
0.1 %
Microstrain
1,000 µε
How it was calculated
  1. ε = ΔL ÷ L₀
  2. ε = 0.001

The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved.

How to use the Strain Calculator

  1. Choose length change or stress and modulus.
  2. Pick what to solve for.
  3. Enter the values in consistent units.

What does this tool do?

Engineering strain is the change in length divided by the original length. It has no units, so it's often written as a percentage or in microstrain (µε, millionths).

Within the elastic range, Hooke's law links strain to stress through Young's modulus: ε = σ ÷ E.

Why use it?

  • Two strain formulas.
  • Percent and microstrain.
  • Solve for any variable.

Use cases

  • Mechanics of materials and engineering coursework.
  • Interpret strain-gauge readings in microstrain.
  • Check whether a part stays within its elastic range.

A steel rod under load

A 2 m steel rod stretches by 1 mm. Strain = 1 ÷ 2,000 = 0.0005, or 500 µε (0.05%). With steel's Young's modulus of about 200 GPa, the stress is 200,000 MPa × 0.0005 = 100 MPa.

Common mistakes

  • Using different units for the change in length and the original length.
  • Applying ε = σ ÷ E beyond the yield point, where the material no longer behaves elastically.
  • Mixing up MPa and GPa for stress and modulus.

The formula

ε = ΔL ÷ L₀
ε = σ ÷ E

Privacy

The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved. There's no account to create and nothing to install.

Frequently asked questions

What is microstrain?

One millionth of strain. 500 µε means the material stretched by 0.05% of its length.

Can strain be negative?

Yes. Compression shortens the material, giving negative strain.

What's the difference between stress and strain?

Stress is force per area (in pascals); strain is the resulting change in shape (no units).

Content last updated . See how M2Toolkit works.

Other tools people use alongside the strain calculator.