Skip to content
M2TOOLKIT

Education · free tool

Resistor Color Code Calculator

Pick the band colours to read a resistor's value and tolerance.

Use it as often as you like — it's free, with no sign-up and no limits.

  • Education
  • Free
  • No sign-up
  • Nothing is sent or stored
  • Updated
Number of bands

Result

Resistance
4.7 kΩ ±5%
Minimum
4.465 kΩ
Maximum
4.935 kΩ
Exact value
4,700 Ω
How it was calculated
  1. Digits 47 × 100 = 4,700 Ω

The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved.

How to use the Resistor Color Code Calculator

  1. Choose 4 or 5 bands.
  2. Select each band's colour, starting from the end without the gap.
  3. Read the resistance and tolerance range.

What does this tool do?

Resistor colour bands encode digits, a multiplier and a tolerance. On a 4-band resistor, yellow-violet-red-gold means 4, 7, × 100, ±5% = 4.7 kΩ ±5%.

Five-band resistors add a third digit for more precise values. The tolerance band is usually set slightly apart from the others.

Why use it?

  • 4- and 5-band resistors.
  • Tolerance range shown.
  • No chart to squint at.

Use cases

  • Identify loose resistors from a parts kit.
  • Check a component before soldering it in.
  • Electronics classes and exams.

Two 10 kΩ resistors

4-band: brown, black, orange, gold → 1, 0, × 1,000, ±5% = 10 kΩ ±5% (9.5–10.5 kΩ).

5-band: brown, black, black, red, brown → 1, 0, 0, × 100, ±1% = 10 kΩ ±1%.

Common mistakes

  • Reading the bands from the wrong end.
  • Confusing red with orange or brown under poor light.
  • Mixing up 4-band and 5-band codes, which use different digit counts.

Privacy

The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved. There's no account to create and nothing to install.

Frequently asked questions

Which end do I start from?

Start from the end where the bands are bunched together; the tolerance band (often gold or silver) is on the other end.

What if I can't tell the colours apart?

Measure it with a multimeter — that's the most reliable check.

What does the tolerance mean?

How far the real value can be from the printed one. ±5% on 10 kΩ means 9.5–10.5 kΩ.

What do gold and silver mean as multipliers?

× 0.1 and × 0.01, for resistors under 10 Ω.

Content last updated . See how M2Toolkit works.

Other tools people use alongside the resistor color code calculator.