How to use the Ohm's Law Calculator
- Choose which two values you know.
- Enter them.
- Read voltage, current, resistance and power.
What does this tool do?
Ohm's law says voltage equals current times resistance: V = IR. Combined with P = VI, any two of the four quantities determine the other two.
For example, a 12 V supply across a 6 Ω resistor drives 2 A and dissipates 24 W.
Why use it?
- All six combinations of two inputs.
- Power included.
- Formula reference.
Use cases
- Physics and electronics homework.
- Choose a resistor for an LED or check a fuse rating.
- Work out how much current an appliance draws.
A 1,000 W kettle on 230 V
Current: I = P ÷ V = 1,000 ÷ 230 ≈ 4.35 A. Resistance of the element: R = V² ÷ P = 230² ÷ 1,000 ≈ 52.9 Ω. On a 120 V supply the same kettle element would draw only about 2.3 A and give about 272 W.
Common mistakes
- Mixing milliamps with amps or kilo-ohms with ohms.
- Applying Ohm's law to components like LEDs whose resistance isn't constant.
- Forgetting power: a resistor that is the right value can still burn out if its wattage rating is too low.
The formula
Privacy
The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved. There's no account to create and nothing to install.
Frequently asked questions
How do I pick a resistor for an LED?
R = (supply voltage − LED forward voltage) ÷ LED current. For 5 V, a 2 V LED and 20 mA: (5 − 2) ÷ 0.02 = 150 Ω.
Does Ohm's law work for AC?
For simple resistive loads yes; with capacitors and inductors use impedance instead of resistance.
What's the power triangle?
P = VI, combined with V = IR, gives P = I²R and P = V² ÷ R.
Content last updated . See how M2Toolkit works.