How to use the Capacitor Calculator
- Choose combine, charge & energy, or RC time constant.
- Enter the values (capacitance in µF).
- Read the results.
What does this tool do?
Capacitors combine the opposite way to resistors: in parallel they add, in series their reciprocals add. A capacitor stores charge Q = CV and energy ½CV².
In an RC circuit the time constant τ = RC is the time to charge to about 63%; after 5τ it's effectively full. The same values set the cut-off frequency of an RC filter.
Why use it?
- Three capacitor calculations.
- Cut-off frequency included.
- Microfarad inputs.
Use cases
- Electronics homework and lab work.
- Timing circuits and simple RC filters.
- Combining capacitors to reach a value you don't have.
Combining, timing and energy
10 µF and 22 µF in parallel give 32 µF. In series they give (10 × 22) ÷ 32 ≈ 6.88 µF.
10 kΩ with 100 µF gives τ = 1 s: about 63% charged after 1 s and effectively full after 5 s.
100 µF at 12 V stores ½ × 0.0001 × 144 = 7.2 mJ.
Common mistakes
- Combining capacitors like resistors — the rules are swapped.
- Forgetting to convert µF to F in formulas.
- Exceeding a capacitor's voltage rating.
The formula
Privacy
The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved. There's no account to create and nothing to install.
Frequently asked questions
What is the time constant?
τ = RC, the time to charge to about 63% (or discharge to about 37%).
What is the cut-off frequency?
The frequency where an RC filter reduces the signal to about 70.7% (−3 dB): f = 1 ÷ 2πRC.
Is a stored charge dangerous?
Large or high-voltage capacitors can be. Discharge them safely before handling.
Content last updated . See how M2Toolkit works.