Skip to content
M2TOOLKIT

Education · free tool

Power Factor Calculator

Find a load's power factor and how much correction it needs.

Use it as often as you like — it's free, with no sign-up and no limits.

  • Education
  • Free
  • No sign-up
  • Nothing is sent or stored
  • Updated
I know the
W
V
A

Shows the capacitor reactive power needed to correct to this value.

Result

Power factor
0.8282
Poor — consider correction
Apparent power (S)
4,830 VA
Reactive power (Q)
2,707.19 var
Phase angle (φ)
34.09°
Correction to 0.95
1,392.46 var of capacitors
How it was calculated
  1. PF = P ÷ S
  2. Q = √(S² − P²)
  3. φ = arccos(PF)

The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved.

How to use the Power Factor Calculator

  1. Choose real power with voltage and current, or real and apparent power.
  2. Enter the values and the supply type.
  3. Read the power factor and the correction needed for your target.

What does this tool do?

Power factor is the ratio of real power (doing useful work) to apparent power (what the supply delivers). Motors and transformers draw reactive power, lowering the power factor and increasing current.

Adding capacitors supplies reactive power locally, raising the power factor. The calculator shows the kVAR needed to reach a target such as 0.95.

Why use it?

  • Single- and three-phase.
  • Correction capacitance in var.
  • Phase angle shown.

Use cases

  • Size capacitor banks for workshops and factories.
  • Understand utility power factor charges.
  • Electrical engineering coursework.

Correcting 10 kW at PF 0.8 to 0.95

Apparent power is 10 ÷ 0.8 = 12.5 kVA and reactive power is 7.5 kVAR. Correction needed: 10 × (0.75 − 0.329) ≈ 4.2 kVAR of capacitors.

Common mistakes

  • Over-correcting past 1.0, which makes the load leading.
  • Mixing single- and three-phase formulas.
  • Ignoring harmonics, which need different solutions.

The formula

PF = P ÷ S
Q = √(S² − P²)
Q_c = P (tan φ₁ − tan φ₂)

Accuracy and limits

  • For learning and quick checks. Real engineering decisions should be verified by a qualified professional.

Privacy

The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved. There's no account to create and nothing to install.

Frequently asked questions

Why does power factor matter?

Low power factor means more current for the same useful power, which wastes energy and can bring utility charges.

What is a good power factor?

Many utilities want 0.9–0.95 or higher.

kW, kVA or kVAR?

kW is real power, kVA is apparent power and kVAR is reactive power.

Content last updated . See how M2Toolkit works.

Other tools people use alongside the power factor calculator.