How to use the Inductor Calculator
- Choose combine or energy & reactance.
- Enter the values (inductance in mH).
- Read the results.
What does this tool do?
Inductors combine like resistors: in series they add, in parallel their reciprocals add (assuming no magnetic coupling between them).
An inductor stores energy ½LI² in its magnetic field and opposes alternating current with a reactance X = 2πfL that rises with frequency.
Why use it?
- Series and parallel together.
- Energy and reactance.
- Millihenry inputs.
Use cases
- Electronics coursework on series, parallel and AC circuits.
- Pick an inductor value for a filter or power supply.
- Estimate energy stored in a coil for safety checks.
10 mH and 22 mH
In series: 10 + 22 = 32 mH. In parallel: (10 × 22) ÷ (10 + 22) = 6.875 mH.
A 10 mH inductor at 50 Hz has a reactance of 2π × 50 × 0.010 = 3.14 Ω, and carrying 2 A it stores ½ × 0.010 × 2² = 0.02 J.
Common mistakes
- Forgetting to convert mH to H before calculating energy or reactance.
- Combining coupled inductors with the simple formulas — mutual inductance changes the result.
- Ignoring the inductor's current rating; above it the core saturates and inductance drops.
The formula
Privacy
The calculation happens instantly in your browser. The numbers you enter are not sent to our servers or saved. There's no account to create and nothing to install.
Frequently asked questions
Why does reactance rise with frequency?
An inductor opposes changes in current. At higher frequency the current changes faster, so it opposes more strongly.
What is an inductor used for?
Filters, switch-mode power supplies, chokes that block noise, and tuned circuits in radios.
Is reactance the same as resistance?
Both are measured in ohms, but reactance stores and returns energy instead of turning it into heat.
Content last updated . See how M2Toolkit works.